Metacarpophalangeal joint reconstruction using a costal osteochondral graft: A case report.

RATIONALE: The conventional treatment of giant cell tumors is intralesional curettage with local adjuvant therapy. Because hand tumors have a high local recurrence, the primary goal for treating tumors of the hand is to eradicate the lesion. PATIENT CONCERNS: To preserve the metacarpophalangeal (MCP) joint function as well as avoid further recurrence after surgery. DIAGNOSES: The giant cell tumor invades the patient's MCP joint in an index proximal phalanx. INTERVENTIONS: Using computer-aided design and three-dimensional printing techniques, we reformed the original shapes of the MCP joint and its peripheral bone to replica models. The surgeon then performed an en bloc resection and proximal phalanx with MCP joint reconstruction by fabricating the patient's costal osteochondral graft during the operation. OUTCOMES: After 6 months of rehabilitation, the patient's finger functions could pinch and grasp objects naturally. At the 1-year follow-up, the range of motion of the MCP, proximal interphalangeal, and distal interphalangeal joints improved from flexion of 35° to 60°, 75° to 85°, and 60° to 80°, respectively. The hand function achieved the mean performance of non-preferred hands for young females at the postoperative 3-year follow-up. LESSONS: The customized prototyping technique has the potential to replica the original patient's bony graft to reach the goal of minimizing the defects at the donor site and maximizing the function of the reconstructed MCP joint.

Kinematic Investigation of Healthy, Arthritic, and Postsurgery Thumbs: Is the Metacarpophalangeal Joint the Gateway to Carpometacarpal Arthritis?

The thumb carpometacarpal (CMC) joint is one of the most likely joints to develop osteoarthritis (OA). If conservative treatments fail to alleviate symptoms, surgery may be pursued. Kinematic outcomes of CMC surgery techniques have been described, but current tools have limitations in capturing motion abilities. The goals of this study were (1) develop a new and robust set of kinematic outcome measures, and apply them to (2) a cohort of younger and older control individuals without CMC OA to determine age and sex-related changes, and (3) a cohort of participants with CMC OA before, 3 months, and 6 months after undergoing thumb ligament reconstruction with tendon interposition surgery to detect the impacts of surgery. 52 (26 males, 26 females) control and 18 (3 males, 15 females) surgical participants were tested. Kinematics were investigated using motion capture by mapping the three-dimensional motion space of the whole thumb, and two-dimensional motion boundaries of the metacarpal (MC) and proximal phalange (PP). Visual analog pain score was recorded. Older control participants had shifted regions of motion compared to younger participants (p ≤ 0.027), suggesting asymptomatic CMC wear. Control females had 31% more metacarpophalangeal (MCP) motion than control males (p = 0.013), which could alter loading paths through the CMC joint and increase OA risk. Pain at 6 months postsurgery was 72% less than presurgery (p < 0.001), but motion abilities were 20-28% less than presurgery (p ≤ 0.074) and 24-40% less than control participants (p ≤ 0.066). These techniques have the possibility of identifying presymptomatic motion changes, including those at the metacarpophalangeal joint in CMC OA progression.

The Application of Sesamoid Position in Diagnosing Thumb Metacarpophalangeal Joint Dorsal Dislocation: A Retrospective Study.

OBJECTIVES: The position of sesamoid of thumb metacarpophalangeal (MCP) joint changed clearly when the joint was dislocated dorsally. However, the significance of sesamoid location in diagnosing joint dislocation was unclear. The present study aimed to explore the positional relationship between sesamoid bone and thumb metacarpophalangeal joint in normal and dorsal dislocation joints. METHODS: Between January 2018 and August 2023, we collected 60 isometric plain films from sixty outpatients and reviewed 56 anisometric plain films from twenty-eight emergency patients with dorsal dislocation of thumb MCP joint at Tianjin Hospital, then took measurements on the hand X-ray images. The sesamoid length on its longitudinal axis was defined as DP, the distance between the distal edge of sesamoid and thumb MCP joint was defined as DJ, and the ratio of DJ and DP was R. An independent-samples t-test and paired-samples t-test was utilized to analyze difference among data groups. RESULTS: The 60 isometric images were from 30 male and 30 female outpatients with normal bone structure in their hands, and the 56 anisometric images of the 28 emergency patients included both preoperative and postoperative materials. Among the outpatients, the actual distance between the distal edge of sesamoid and thumb MCP joint space (DJ) was 2.09 mm and 1.40 mm in males and females, respectively. The authentic average length of sesamoid (DP) was 4.46 mm in males and 4.22 mm in females. The average value of R (the ratio of DJ and DP) in males and females was 0.49 and 0.34, respectively. There were gender-related statistical differences in DJ (p < 0.01) and R (p=0.01), but no statistical difference in DP (p > 0.05). For the 28 emergency patients, the mean value of R was -0.47 before joint reduction and 0.58 after joint reduction, with statistical difference between them (p < 0.01). CONCLUSIONS: There was significant difference in the relative position between sesamoid and thumb MCP joint when joint dislocation and joint reduction. The distal edge of sesamoid beyond thumb MCP joint could be an evidence in diagnosing joint dorsal dislocation. The distal edge of sesamoid below thumb MCP joint could be an evidence of joint reduction.

High Fracture Rate of AVANTA Silicone Implant Following Arthroplasty of the Thumb MCP Joint of Rheumatoid Arthritis Patients with Boutonniere Deformities.

We retrospectively investigated the mid-term outcomes of arthroplasty using the AVANTA silicone implant for thumb metacarpophalangeal (MCP) joints with boutonniere deformity in patients with rheumatoid arthritis (RA). This study involved 36 thumbs of 33 RA patients with a mean follow-up period of 5.1 years (range, 2.0-13.3). Postoperatively, the mean extension was significantly increased and the mean flexion was significantly decreased (p<0.001, p<0.001, respectively), resulting in the mean arc of range of motion (ROM) shifting in the direction of extension after surgery. Implant fracture was observed in 10 thumbs (28%), and 4 of these (11%) underwent revision surgery. The survivorship with implant fracture and revision surgery as endpoints were 73.4% and 91.8% at 5 years, respectively. The preoperative arc of ROM and the postoperative flexion range of the implant-fracture group were significantly greater than those in the no-implant-fracture group (p=0.039, 0.034, respectively). These results suggest the importance of patient education and careful rehabilitation to prevent excessive flexion. Overall, the AVANTA silicone implant showed a relatively high rate of implant fracture at our institute.

Thumb Metacarpophalangeal Joint Kinematics and Elongation of the Ulnar Collateral Ligament.

PURPOSE: The purpose of the study was to determine if the sphericity of the thumb metacarpophalangeal (MCP) joint influences the joint's rotational axis (RA) and elongation patterns of the ulnar collateral ligament (UCL). METHODS: Ulnar collateral ligament origins and attachments of 28 fresh-frozen cadaveric thumbs were marked with a radiopaque marker. Lateral radiographs were obtained in neutral and 20°, 40°, and 60° of flexion. The dorsal and palmar joint gap and the length of four different UCL portions were digitally measured in all flexion states. The RA was determined by the intersection of the midshaft axis of the proximal phalanx in neutral and flexion states. Sphericity of the MCP joint was assessed using morphometric parameters. Joints were grouped as round or flat. Differences in all measured parameters between groups were analyzed. RESULTS: During flexion, the dorsal joint gap increased by 322% in flat joints and 163% in round joints. The palmar joint gap decreased to 45% in flat joints and to 87% in round joints. The RA was at 29% of metacarpal height and 96% of metacarpal length in flat joints and at 40% of height and 86% of length in round joints. Maximum UCL elongation (111%) was noted at 40° flexion in the dorsal proper UCL in flat joints and at 60° flexion in the accessory UCL (117%) in round joints. CONCLUSIONS: In flat MCP joints, the RA is more dorsal and distal in the metacarpal head compared to round joints, resulting in a hinged flexion motion. Elongation of the UCL is highest at end flexion in round joints and highest at midflexion in flat joints. CLINICAL RELEVANCE: The different kinematics of flat and round MCP joints may contribute to the understanding of the pathophysiology of UCL ruptures. The propensity of this injury and the position in which they occur may be affected by the MCP joint morphology.

The influence of a tension band fixation as an adjunct for arthrodesis of the metacarpophalangeal joint in the horse.

OBJECTIVES: To determine the influence of a stainless-steel cable (SSC) tension band fixation as an adjunct to a locking compression plate (LCP) for arthrodesis of the equine metacarpophalangeal (MCP) joint. STUDY DESIGN: Experimental. An ex vivo biomechanical paired equine cadaver limb study. SAMPLE POPULATION: Five MCP joint pairs were collected from adult Thoroughbred horses, euthanized for reasons unrelated to orthopedic disease. METHODS: Each pair of MCP joints were randomly implanted with either a dorsally placed 5.5 mm LCP and a palmarly placed 2.0 mm SSC or a dorsally placed 5.5 mm LCP alone. Each construct was tested in cyclic loading followed by single cycle to failure in axial compression. Displacement at a target load of 1 kN over 3600 cycles at 1 Hz was recorded prior to single cycle to failure testing. RESULTS: In cyclic testing, displacement was not significantly different between the first and last 5% of testing cycles regardless of construct. Maximum displacement of each construct during cyclic testing was <1.1 mm. In single cycle testing, the observed yield point did not reveal any difference between LCP and LCP-SSC (p = .440). The maximum load at failure was significantly higher in LCP-SSC compared to constructs with the LCP alone (p = .046). CONCLUSION: The addition of the SSC to the LCP did not statistically affect construct displacement during cyclic loading or construct yield load during subsequent single cycle to failure. CLINICAL SIGNIFICANCE: This study provided much needed information regarding the necessity of a tension band SSC application in the arthrodesis of the MCP/MTP joint in horses.

Contribution to the study of stresses in the thumb column during key pinch grip.

OBJECTIVES: The aim of this study was to calculate the stress acting on the trapeziometacarpal joint during an key pinch grip. METHOD: We used profile X-rays of the thumb to measure the various bony and muscle lever arms. We assessed the angles of action of the muscular elements involved in the thumb column. Based on this data, we established a two-dimensional geometric model that enabled us to determine the forces at each joint level, as a function of stresses and muscular contributions. We were also able to calculate the participation of the different muscle groups in obtaining a balanced situation. RESULTS: Our results, as a function of the degree of flexion of the interphalangeal and metacarpophalangeal joints, show a multiplying factor of 2.9-3.19 in relation to the key pinch grip force. DISCUSSION: Previous studies modelling a key pinch grip are showed multiplying factors from 6 to 13 in relation to the key pinch grip force. They are not compatible with the characteristics of the polyethylene used for trapeziometacarpal prostheses, whereas numerous articles in the literature show survival rates that are more or less comparable to those of total hip prostheses. These studies required an excessive number of assumptions, which could lead to error. Our results are compatible with the results of trapeziometacarpal prosthesis and with those of a recent study measuring intra-articular trapeziometacarpal pressure in a cadaveric model. Our model allows us to test different configurations of the thumb spine depending on the degree of flexion of the interphalangeal and metacarpophalangeal joints.

Multiple pilonidal sinuses of both hands in a dog groomer: A case report.

OBJECTIVE: Pilonidal sinus of the hand is an occupational hazard for barbers, cow milkers, sheep shearers and dog groomers. Here, we report on a dog groomer who had four pilonidal sinuses. CASE PRESENTATION: A 49-year-old woman working as a dog groomer complained of multiple non-erythematous and fluctuant nodules on both hands, associated with pain, which had been identified five years previously. On the skin of her right hand, three nodules were observed on the volar (diameter: 1.5 cm) and medial (diameter: 1.4 cm) sides of fifth metacarpophalangeal joint and the volar aspect of the distal phalanx of the small finger (diameter: 0.7 cm). On the left hand, a 2-cm diameter nodule was identified on the volar side of the fifth metacarpophalangeal joint region. The nodules were excised surgically. A 5-mm long hair was removed from one nodule. Histopathology confirmed pilonidal sinus, treated by excision. One month postoperatively, the wound had healed uneventfully. CONCLUSION: When nodules are found in dog groomers, clinicians should consider the possibility of pilonidal sinus disease.

The Sensitivity of the Endpoint Forces of Thumb Extrinsic and Intrinsic Muscles to Changes in Joint Angles, Muscle Moment Arms and Bone Lengths in the Flexed Thumb.

A previous study showed in situ measurements of thumb-tip forces produced by muscles vary substantially among cadaveric specimens. Potential sources of variability include inter-specimen anatomic differences and postural deviations from the nominal posture in which the specimens were tested. This study aimed to theoretically determine the variation in thumb-tip force caused by inter-specimen differences in thumb anatomy and posture. We developed a two-dimensional mathematical model of force production at the thumb tip based on published estimates of muscle moment arms, bone length, and joint angle measurements from nine cadaveric specimens. The model was placed in a flexed posture. Using the model, we calculated variations in magnitude and direction of each muscle's thumb-tip force induced by a ±1 standard deviation (or equivalent) variation in each bone length, the moment arm of the muscle (i.e., anatomic factors), and each joint angle (i.e., postural factor). For most muscles, inter-specimen differences in the metacarpophalangeal (MP) joint angle produced at least a 75% larger variation in thumb-tip force magnitude than that produced by other factors. For all muscles, differences in the interphalangeal joint angle among specimens produced the largest variation in thumb-tip force direction. For some muscles, inter-specimen differences in bone lengths, moment arms, and MP joint angles also produced large variations in thumb-tip force direction. This study suggests deviation from the nominal flexed thumb posture and large measurement variability in muscle moment arms are primary and secondary sources, respectively, of variability in thumb-tip forces produced by the majority of thumb muscles. Further, this study suggests a more careful approach to standardizing the thumb posture would likely improve current measurements of thumb-tip forces.Clinical Relevance- This work describes the influence of anatomic and postural factors on thumb-tip forces that thumb muscles produce. The results of this work have implications for musculoskeletal modeling and surgical reconstruction of grasp.

Machine learning identifies right index finger tenderness as key signal of DAS28-CRP based psoriatic arthritis activity.

Psoriatic arthritis (PsA) is a chronic inflammatory systemic disease whose activity is often assessed using the Disease Activity Score 28 (DAS28-CRP). The present study was designed to investigate the significance of individual components within the score for PsA activity. A cohort of 80 PsA patients (44 women and 36 men, aged 56.3 ± 12 years) with a range of disease activity from remission to moderate was analyzed using unsupervised and supervised methods applied to the DAS28-CRP components. Machine learning-based permutation importance identified tenderness in the metacarpophalangeal joint of the right index finger as the most informative item of the DAS28-CRP for PsA activity staging. This symptom alone allowed a machine learned (random forests) classifier to identify PsA remission with 67% balanced accuracy in new cases. Projection of the DAS28-CRP data onto an emergent self-organizing map of artificial neurons identified outliers, which following augmentation of group sizes by emergent self-organizing maps based generative artificial intelligence (AI) could be defined as subgroups particularly characterized by either tenderness or swelling of specific joints. AI-assisted re-evaluation of the DAS28-CRP for PsA has narrowed the score items to a most relevant symptom, and generative AI has been useful for identifying and characterizing small subgroups of patients whose symptom patterns differ from the majority. These findings represent an important step toward precision medicine that can address outliers.

MITEx: A Portable Hand Exoskeleton for Assessment and Treatment in Neurological Rehabilitation.

This work describes the design and preliminary characterization of a novel portable hand exoskeleton for poststroke rehabilitation. The platform actively mobilizes the index-metacarpophalangeal (I-MCP) joint, and it additionally offers individual rigid support to distal degrees of freedom (DoFs) of the index and thumb. The test-bench characterization proves the capability of the device to render torques at the I-MCP level with high fidelity within frequencies of interest for the application (up to 3 Hz). The introduction of a feed-forward friction compensation at the actuator level lowers the output mechanical stiffness by 32%, contributing to a highly transparent behavior; moreover, the functionality of the platform in rendering different interaction strategies (patient/robot-in-charge) is tested with three healthy subjects, showing the potential of the device to provide assistance as needed.

Cone-beam computed tomography produces images of numerically comparable diagnostic quality for bone and inferior quality for soft tissues compared with fan-beam computed tomography in cadaveric equine metacarpophalangeal joints.

Cone-beam computed tomography (CBCT) is an emerging modality for imaging of the equine patient. The objective of this prospective, descriptive, exploratory study was to assess visualization tasks using CBCT compared with conventional fan-beam CT (FBCT) for imaging of the metacarpophalangeal joint in equine cadavers. Satisfaction scores were numerically excellent with both CBCT and FBCT for bone evaluation, and FBCT was numerically superior for soft tissue evaluation. Preference tests indicated FBCT was numerically superior for soft tissue evaluation, while preference test scoring for bone was observer-dependent. Findings from this study can be used as background for future studies evaluating CBCT image quality in live horses.

Efficacy of splinting the wrist and metacarpophalangeal joints for the treatment of Carpal tunnel syndrome: an assessor-blinded randomised controlled trial.

OBJECTIVES: To compare the efficacy of a traditional cock-up splint, which supports the wrist only, with a modified splint that supports the wrist and the metacarpophalangeal (MCP) joints of the medial four digits in the treatment of carpal tunnel syndrome (CTS). DESIGN: An assessor-blind randomised controlled trial. SETTING: Hospital-based hand therapy clinics. PARTICIPANTS: Fifty-nine adults with mild-to-moderate CTS were randomly assigned to wear a wrist splint (control group) or an MCP splint (intervention group) for 6 weeks. OUTCOME MEASURES: The standardised outcome measures used included grip and pinch strength, the static two-point discrimination test, Phalen's manoeuvre test, Tinel's sign and the Boston CTS Questionnaire. RESULTS: Both groups improved significantly from splint use in some clinical features. The wrist splint and the MCP splint groups had significant improvements in lateral pinch strength (p=0.032 and p=0.002, respectively), two-point discrimination of the thumb (p=0.003 and p=0.041, respectively), two-point discrimination of the index (p=0.035 and p=0.023, respectively) and the Phalen's manoeuvre symptoms (p=0.025 and p=0.002, respectively). The MCP splint group had additional improvements over the wrist splint group in tip pinch (p=0.012) and Palmar pinch (p=0.011) strength. CONCLUSION: Splinting is a practical and effective intervention option for improving the symptoms of CTS. A wrist splint that incorporates the MCP joints is more effective than the traditional wrist-only splint, with long-lasting improvements that remained consistent after 6 months of the splint intervention. Using the more effective MCP splint may consequently reduce disability, facilitate return to work and lower the associated costs. TRIAL REGISTRATION NUMBER: ISRCTN13189602.

Erosion Identification in Metacarpophalangeal Joints in Rheumatoid Arthritis using High-Resolution Peripheral Quantitative Computed Tomography.

Bone erosions are a pathological feature of several forms of inflammatory arthritis including rheumatoid arthritis (RA). The increased presence and size of erosions are associated with poor outcomes, joint function, and disease progression. High-resolution peripheral quantitative computed tomography (HR-pQCT) provides unparalleled in vivo visualization of bone erosions. However, at this resolution, discontinuities in the cortical shell (cortical breaks) that are associated with normal physiological processes and pathology are also visible. The Study grouP for xtrEme Computed Tomography in Rheumatoid Arthritis previously used a consensus process to develop a definition of pathological erosion in HR-pQCT: a cortical break detected in at least two consecutive slices, in at least two perpendicular planes, non-linear in shape, with underlying trabecular bone loss. However, despite the availability of a consensus definition, erosion identification is a demanding task with challenges in inter-rater variability. The purpose of this work is to introduce a training tool to provide users with guidance on identifying pathological cortical breaks on HR-pQCT images for erosion analysis. The protocol presented here uses a custom-built module (Bone Analysis Module (BAM) - Training), implemented as an extension to an open-source image processing software (3D Slicer). Using this module, users can practice identifying erosions and compare their results to erosions annotated by expert rheumatologists.

The silicone metacarpophalangeal joint arthroplasty: An in-vitro analysis.

BACKGROUND: Silicone is still the gold standard implant in metacarpophalangeal arthroplasty. Whereas the clinical results are acceptable, in follow-ups with >10 years, high rates of implant fracture are common, and 5 to 7% of implants required revision. This work's purpose is to analyse the hypothesis that the joint flexion amplitude has a relevant effect on bone strain level, implant stress and bone-implant micromotion, which can reflect an increase in the risk of bone resorption/fatigue failure, implant fracture and osteolysis. METHODS: To experimentally predict the cortical loading behaviour, composite metacarpals and proximal phalanges were used in intact and implanted states. A finite element model was developed to evaluate the structural behaviour of cancellous bone and implant. This model was validated by comparing cortical strain and load-displacement curve with experimental measurements. FINDINGS: Bone strain changes between the intact and the implanted states showed a load transfer effect from the cortical to the cancellous bone that increases significantly with the flexion's amplitude rise. The peak implant stress occurred in the flexion amplitudes further away from the implant neutral angle. The highest implant pistoning motion and the highest phalanx cancellous-bone strain occurred simultaneously at the maximum flexion amplitude. INTERPRETATION: Limiting joint flexion range will be helpful to reduce the strain-shielding effect on cortical bone, minimizing the overload effect on cancellous bone and decreasing the stress levels and the pistoning motion on the implant, ultimately contributing to the longevity of silicone arthroplasty.

Role of inflammatory burden and treatment on joint space width in psoriatic arthritis-a high-resolution peripheral quantitative computed tomography study.

BACKGROUND: To investigate the relationship between disease-related parameters and joint space width (JSW) on high-resolution peripheral quantitative computed tomography (HR-pQCT) in psoriatic arthritis (PsA) patients. METHODS: PsA patients who underwent HR-pQCT examination of the second to fourth metacarpophalangeal joint (MCPJ 2-4) were recruited in this cross-sectional study. The joint space metrics included joint space volume (JSV), mean, minimum, and maximum JSW, JSW asymmetry, and distribution. Correlation analysis and multivariable linear regression models were used to determine the association between disease-related variables and JSW. RESULTS: Sixty-seven patients [37 (55.2%) males; median (IQR) age: 57.0 (53.0, 63.0); median disease duration: 21 (16, 28) years] were included in this analysis. Multivariable linear regression analysis demonstrated that males had larger JSV (MCPJ 2-4), mean (MCPJ 4), and maximum JSW (MCPJ 3). Longer disease duration (MCPJ 2-3) and higher ESR values (MCPJ 3) were negatively associated with mean and maximum JSW, while higher damage joint count was negatively associated with mean and minimum JSW (MCPJ 2). Use of conventional synthetic disease-modifying anti-rheumatic drugs (csDMARDs) was negatively associated with minimum JSW (MCPJ 3) while use of biologic DMARDs (bDMARDs) was positively associated with minimum JSW (MCPJ 2). CONCLUSION: Higher inflammatory burden as reflected by longer disease duration, higher ESR levels, and damage joint count was negatively associated with mean, maximum, and minimum JSW, while suppression of inflammation using bDMARDs seems to limit the decline in JSW.

Satisfactory thumb metacarpophalangeal joint stability after ligament reconstruction with flexor digitorum superficialis in children with radial longitudinal deficiency.

We investigated thumb joint stability and patient-reported and functional outcomes a minimum of 1 year after flexor digitorum superficialis opponensplasty and ligament reconstruction in 23 thumbs of 20 consecutive children with radial longitudinal deficiency. In total, 15 thumbs had preoperative multidirectional instability in the metacarpophalangeal joint. We reconstructed 22 ulnar and 16 radial collateral ligaments. At follow-up, all the metacarpophalangeal joints were stable ulnarly. Seven metacarpophalangeal joints were unstable radially despite ligament reconstruction but had no related complaints. We recommend the flexor digitorum superficialis opponensplasty as a safe and reliable procedure in hypoplastic thumbs to create stability and augment thumb strength.Level of evidence: IV.

Metacarpophalangeal joint angle of the thumb during maximal pinch strength: a study of healthy volunteers.

Mean metacarpophalangeal joint angles of the thumb during maximal pinch were 9° greater in men than in women. More flexion was not associated with more force during key pinch, but a moderate association was found for palmar pinch, especially in men.

Management of Complex Hand and Wrist Ligament Injuries.

Ligamentous injuries in the hand and wrist are often underdiagnosed and can present with significant functional limitations if there is untimely recognition of injury. Adequate repair or reconstruction is critical in restoring joint stability and mobility. The purpose of this review is to provide an overview of the metacarpophalangeal joint, scapholunate interosseous ligament (SLIL), and non-SLIL carpal ligament anatomy, diagnosis, imaging, treatment consideration and options, as well as surgical techniques encompassing repair, reconstruction, and fusion.